Post-registration, RTOs are tasked with many responsibilities including annual declarations, AVETMISS reporting, and marketing compliance, and validation is often the most challenging.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.
According to Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.
The standards mandate two types of validation.
The initial validation type checks that your RTO's assessments align with the training package requirements.
The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.
This indicates validation occurs before and after the assessment process. We will focus on the first type: assessment tool validation.
Defining the Two Types of Assessment Validation
An Overview of Assessment Validation
As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, known as pre-assessment validation, pertains to the first part of the clause, focusing on meeting all unit requirements and ensuring total workbook compliance.
Conversely, post-assessment validation pertains to the implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
Our focus in this article will be on assessment tool validation.
How to Properly Conduct Assessment Tool Validation
Having distinguished between the two types of validation, let’s dive into the details of assessment tool validation.
Timing of Assessment Tool Validation
Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.
This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.
There's no need to wait for your next 5-year cycle validation schedule. Validate new resources immediately to ensure they are suitable for student use.
However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:
- updating your resources
- you add new training products on scope
- you review your course against training product updates
- identify your learning resources as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based approach to regulation means RTOs must conduct regular risk assessments. Complaints from students about learning resources signal the need for assessment tool validation.
Determining Training Products for Validation
Remember, this type of validation is to ensure all learning resources are compliant before use. All RTOs should validate all unit resources.
Resources Required for Assessment Tool Validation
Educational Materials
For validation of your assessment tools, you will require the full set of your learning resources:
Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.
Learner/student workbook – assess its appropriateness as an assessment tool. Confirm clear instructions and adequate answer fields. This is a common problem.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – these might include checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are appropriate for the assessment task and meet unit requirements.
Validation Committee
Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.
Together, your validation panel should possess:
Vocational competencies and current industry skills relevant to the unit being validated
Recent expertise and skills in vocational teaching and learning
Either one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or an updated successor
Assessment validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool helps in both the validation process and documentation. It makes it simpler to see how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can act as evidence that you have validated your resources before they are used by students.
ASQA does not specify a required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools as a whole to ensure they meet the principles of assessment.
Principles of Assessment Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?
As we explained in our blog post Common Problems In Assessment Tools, it’s vital that your assessment tools enable trainers to follow assessment principles and evidence rules.
Essential Principles of Assessment
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?
Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?
Validity – Is the assessment testing what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment produce the same results every time, regardless of who conducts the training? Will different assessors consistently decide on skill competence?
Essential Rules of Evidence
Validity – Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool ensure that the work is the candidate’s own?
Currency – Do the assessment tools reflect current units of competency and modern industry practices?
Although these are frequently covered in VET professional development and nationally recognised training, many tools still struggle to meet these requirements.
To prevent employing learning resources that miss some unit requirements, be sure to follow these guidelines:
Lead by Example
Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
nappy changing
bottle preparation, feeding infants from bottles, and cleaning equipment
prepare solid foods and feed infants
respond appropriately to baby signs and cues
prepare infants for sleep and soothe them
monitor and promote age-appropriate physical exploration and gross motor skills
Having students describe the nappy-changing process for babies under 12 months doesn’t fulfill the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Watch Out for the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
All Requirements or Not Competent
Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be Clearer?
Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What type of information can be included in a work package?
Possible answers could include:
Necessary resources
Pertinent costs
Time required for activities
Assigned functions and responsibilities
If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.
This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. These can confuse students and assessors, as demonstrated in the sample question below:
Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.
Answers could include, but are not limited to:
Weather conditions – isolation of work area, engineering, PPE
Work click here area and ground conditions – elimination, isolation, engineering
People – isolating, use of engineering controls, administration
Structural hazards – substituting, isolation, use of engineering controls
Chemical hazards – isolation, engineering, administrative controls
Equipment or machinery – isolation, engineering controls, administration
Avoiding double-barrelled questions simplifies responses for students and allows assessors to accurately judge student competence.
Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.